smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.46-gentoo-adrien] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 860 QVO 2TB Serial Number: S4CYNF0M208568N LU WWN Device Id: 5 002538 e40d1d95a Firmware Version: RVQ01B6Q User Capacity: 2 000 398 934 016 bytes [2,00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5533 ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Oct 6 18:16:04 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 160) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 097 097 000 - 13479 12 Power_Cycle_Count -O--CK 097 097 000 - 2053 177 Wear_Leveling_Count PO--C- 097 097 000 - 17 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 074 037 000 - 26 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 27 241 Total_LBAs_Written -O--CK 099 099 000 - 42100121091 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce-0xcf SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 256 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 26 Celsius Power Cycle Min/Max Temperature: 24/25 Celsius Lifetime Min/Max Temperature: 12/63 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (59) Index Estimated Time Temperature Celsius 60 2023-10-05 21:00 30 *********** ... ..( 6 skipped). .. *********** 67 2023-10-05 22:10 30 *********** 68 2023-10-05 22:20 31 ************ 69 2023-10-05 22:30 31 ************ 70 2023-10-05 22:40 31 ************ 71 2023-10-05 22:50 32 ************* 72 2023-10-05 23:00 32 ************* 73 2023-10-05 23:10 32 ************* 74 2023-10-05 23:20 29 ********** 75 2023-10-05 23:30 27 ******** 76 2023-10-05 23:40 27 ******** 77 2023-10-05 23:50 26 ******* ... ..( 10 skipped). .. ******* 88 2023-10-06 01:40 26 ******* 89 2023-10-06 01:50 25 ****** 90 2023-10-06 02:00 26 ******* 91 2023-10-06 02:10 25 ****** ... ..( 3 skipped). .. ****** 95 2023-10-06 02:50 25 ****** 96 2023-10-06 03:00 ? - 97 2023-10-06 03:10 26 ******* 98 2023-10-06 03:20 36 ***************** 99 2023-10-06 03:30 26 ******* 100 2023-10-06 03:40 25 ****** 101 2023-10-06 03:50 28 ********* 102 2023-10-06 04:00 30 *********** 103 2023-10-06 04:10 29 ********** 104 2023-10-06 04:20 30 *********** 105 2023-10-06 04:30 30 *********** 106 2023-10-06 04:40 30 *********** 107 2023-10-06 04:50 31 ************ ... ..( 3 skipped). .. ************ 111 2023-10-06 05:30 31 ************ 112 2023-10-06 05:40 32 ************* ... ..( 28 skipped). .. ************* 13 2023-10-06 10:30 32 ************* 14 2023-10-06 10:40 31 ************ 15 2023-10-06 10:50 31 ************ 16 2023-10-06 11:00 31 ************ 17 2023-10-06 11:10 30 *********** ... ..( 35 skipped). .. *********** 53 2023-10-06 17:10 30 *********** 54 2023-10-06 17:20 29 ********** 55 2023-10-06 17:30 30 *********** 56 2023-10-06 17:40 ? - 57 2023-10-06 17:50 25 ****** 58 2023-10-06 18:00 25 ****** 59 2023-10-06 18:10 25 ****** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 2053 --- Lifetime Power-On Resets 0x01 0x010 4 13479 --- Power-on Hours 0x01 0x018 6 42100121091 --- Logical Sectors Written 0x01 0x020 6 224218130 --- Number of Write Commands 0x01 0x028 6 73424410890 --- Logical Sectors Read 0x01 0x030 6 388333321 --- Number of Read Commands 0x01 0x038 6 3145000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 26 --- Current Temperature 0x05 0x020 1 63 --- Highest Temperature 0x05 0x028 1 12 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 7140 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 2 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description