Compare Pastes

Differences between the pastes #146294 (30.09.2020 10:59) and #184916 (20.05.2021 03:59).

smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.57-calculate] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     ST6000DM003-2CY186
Serial Number:    WCT3GWT5
LU WWN Device Id: 5 000c50 0d012fe93
Firmware Version: 0001
User Capacity:    6,001,175,126,016 bytes [6.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5425 rpm
Form Factor:      3.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-3 T13/2161-D revision 5
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Sep 30 15:59:54 2020 +08
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x73) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 764) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x30a5)	SCT Status supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   081   064   006    Pre-fail  Always       -       128320943
  3 Spin_Up_Time            0x0003   095   094   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       11
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   072   060   045    Pre-fail  Always       -       15518587
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       475 (236 112 0)
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       10
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   060   049   040    Old_age   Always       -       40 (Min/Max 33/50)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       6
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       62
194 Temperature_Celsius     0x0022   040   051   000    Old_age   Always       -       40 (0 32 0 0 0)
195 Hardware_ECC_Recovered  0x001a   081   064   000    Old_age   Always       -       128320943
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       269 (142 163 0)
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       20191236159
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       6631857933

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.

1		smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.57-calculate] (local build)
2		Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
3
4		=== START OF INFORMATION SECTION ===
5		Device Model: ST6000DM003-2CY186
6		Serial Number: WCT3GWT5
7		LU WWN Device Id: 5 000c50 0d012fe93
8		Firmware Version: 0001
9		User Capacity: 6,001,175,126,016 bytes [6.00 TB]
10		Sector Sizes: 512 bytes logical, 4096 bytes physical
11		Rotation Rate: 5425 rpm
12		Form Factor: 3.5 inches
13		Device is: Not in smartctl database [for details use: -P showall]
14		ATA Version is: ACS-3 T13/2161-D revision 5
15		SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
16		Local Time is: Wed Sep 30 15:59:54 2020 +08
17		SMART support is: Available - device has SMART capability.
18		SMART support is: Enabled
19
20		=== START OF READ SMART DATA SECTION ===
21		SMART overall-health self-assessment test result: PASSED
22
23		General SMART Values:
24		Offline data collection status: (0x00) Offline data collection activity
25		was never started.
26		Auto Offline Data Collection: Disabled.
27		Self-test execution status: ( 0) The previous self-test routine completed
28		without error or no self-test has ever
29		been run.
30		Total time to complete Offline
31		data collection: ( 0) seconds.
32		Offline data collection
33		capabilities: (0x73) SMART execute Offline immediate.
34		Auto Offline data collection on/off support.
35		Suspend Offline collection upon new
36		command.
37		No Offline surface scan supported.
38		Self-test supported.
39		Conveyance Self-test supported.
40		Selective Self-test supported.
41		SMART capabilities: (0x0003) Saves SMART data before entering
42		power-saving mode.
43		Supports SMART auto save timer.
44		Error logging capability: (0x01) Error logging supported.
45		General Purpose Logging supported.
46		Short self-test routine
47		recommended polling time: ( 1) minutes.
48		Extended self-test routine
49		recommended polling time: ( 764) minutes.
50		Conveyance self-test routine
51		recommended polling time: ( 2) minutes.
52		SCT capabilities: (0x30a5) SCT Status supported.
53		SCT Data Table supported.
54
55		SMART Attributes Data Structure revision number: 10
56		Vendor Specific SMART Attributes with Thresholds:
57		ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
58		1 Raw_Read_Error_Rate 0x000f 081 064 006 Pre-fail Always - 128320943
59		3 Spin_Up_Time 0x0003 095 094 000 Pre-fail Always - 0
60		4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 11
61		5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
62		7 Seek_Error_Rate 0x000f 072 060 045 Pre-fail Always - 15518587
63		9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 475 (236 112 0)
64		10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
65		12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 10
66		183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
67		184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
68		187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
69		188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
70		189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
71		190 Airflow_Temperature_Cel 0x0022 060 049 040 Old_age Always - 40 (Min/Max 33/50)
72		191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
73		192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 6
74		193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 62
75		194 Temperature_Celsius 0x0022 040 051 000 Old_age Always - 40 (0 32 0 0 0)
76		195 Hardware_ECC_Recovered 0x001a 081 064 000 Old_age Always - 128320943
77		197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
78		198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
79		199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
80		240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 269 (142 163 0)
81		241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 20191236159
82		242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 6631857933
83
84		SMART Error Log Version: 1
85		No Errors Logged
86
87		SMART Self-test log structure revision number 1
88		No self-tests have been logged. [To run self-tests, use: smartctl -t]
89
90		SMART Selective self-test log data structure revision number 1
91		SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
92		1 0 0 Not_testing
93		2 0 0 Not_testing
94		3 0 0 Not_testing
95		4 0 0 Not_testing
96		5 0 0 Not_testing
97		Selective self-test flags (0x0):
98		After scanning selected spans, do NOT read-scan remainder of disk.