Compare Pastes

Differences between the pastes #127135 (30.09.2019 19:42) and #186281 (23.05.2021 12:42).

Wiphy phy0
	max # scan SSIDs: 20
	max scan IEs length: 425 bytes
	max # sched scan SSIDs: 20
	max # match sets: 11
	max # scan plans: 2
	max scan plan interval: 65535
	max scan plan iterations: 254
	Retry short limit: 7
	Retry long limit: 4
	Coverage class: 0 (up to 0m)
	Device supports RSN-IBSS.
	Device supports AP-side u-APSD.
	Supported Ciphers:
		* WEP40 (00-0f-ac:1)
		* WEP104 (00-0f-ac:5)
		* TKIP (00-0f-ac:2)
		* CCMP-128 (00-0f-ac:4)
		* CMAC (00-0f-ac:6)
	Available Antennas: TX 0 RX 0
	Supported interface modes:
		 * IBSS
		 * managed
		 * AP
		 * AP/VLAN
		 * monitor
		 * P2P-client
		 * P2P-GO
		 * P2P-device
	Band 1:
		Capabilities: 0x11ee
			HT20/HT40
			SM Power Save disabled
			RX HT20 SGI
			RX HT40 SGI
			TX STBC
			RX STBC 1-stream
			Max AMSDU length: 3839 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 4 usec (0x05)
		HT Max RX data rate: 300 Mbps
		HT TX/RX MCS rate indexes supported: 0-15
		Bitrates (non-HT):
			* 1.0 Mbps
			* 2.0 Mbps (short preamble supported)
			* 5.5 Mbps (short preamble supported)
			* 11.0 Mbps (short preamble supported)
			* 6.0 Mbps
			* 9.0 Mbps
			* 12.0 Mbps
			* 18.0 Mbps
			* 24.0 Mbps
			* 36.0 Mbps
			* 48.0 Mbps
			* 54.0 Mbps
		Frequencies:
			* 2412 MHz [1] (20.0 dBm)
			* 2417 MHz [2] (20.0 dBm)
			* 2422 MHz [3] (20.0 dBm)
			* 2427 MHz [4] (20.0 dBm)
			* 2432 MHz [5] (20.0 dBm)
			* 2437 MHz [6] (20.0 dBm)
			* 2442 MHz [7] (20.0 dBm)
			* 2447 MHz [8] (20.0 dBm)
			* 2452 MHz [9] (20.0 dBm)
			* 2457 MHz [10] (20.0 dBm)
			* 2462 MHz [11] (20.0 dBm)
			* 2467 MHz [12] (20.0 dBm) (no IR)
			* 2472 MHz [13] (20.0 dBm) (no IR)
	Band 2:
		Capabilities: 0x11ee
			HT20/HT40
			SM Power Save disabled
			RX HT20 SGI
			RX HT40 SGI
			TX STBC
			RX STBC 1-stream
			Max AMSDU length: 3839 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 4 usec (0x05)
		HT Max RX data rate: 300 Mbps
		HT TX/RX MCS rate indexes supported: 0-15
		VHT Capabilities (0x038071a0):
			Max MPDU length: 3895
			Supported Channel Width: neither 160 nor 80+80
			short GI (80 MHz)
			TX STBC
			SU Beamformee
		VHT RX MCS set:
			1 streams: MCS 0-9
			2 streams: MCS 0-9
			3 streams: not supported
			4 streams: not supported
			5 streams: not supported
			6 streams: not supported
			7 streams: not supported
			8 streams: not supported
		VHT RX highest supported: 0 Mbps
		VHT TX MCS set:
			1 streams: MCS 0-9
			2 streams: MCS 0-9
			3 streams: not supported
			4 streams: not supported
			5 streams: not supported
			6 streams: not supported
			7 streams: not supported
			8 streams: not supported
		VHT TX highest supported: 0 Mbps
		Bitrates (non-HT):
			* 6.0 Mbps
			* 9.0 Mbps
			* 12.0 Mbps
			* 18.0 Mbps
			* 24.0 Mbps
			* 36.0 Mbps
			* 48.0 Mbps
			* 54.0 Mbps
		Frequencies:
			* 5180 MHz [36] (20.0 dBm) (no IR)
			* 5200 MHz [40] (20.0 dBm) (no IR)
			* 5220 MHz [44] (20.0 dBm) (no IR)
			* 5240 MHz [48] (20.0 dBm) (no IR)
			* 5260 MHz [52] (20.0 dBm) (no IR, radar detection)
			* 5280 MHz [56] (20.0 dBm) (no IR, radar detection)
			* 5300 MHz [60] (20.0 dBm) (no IR, radar detection)
			* 5320 MHz [64] (20.0 dBm) (no IR, radar detection)
			* 5500 MHz [100] (disabled)
			* 5520 MHz [104] (disabled)
			* 5540 MHz [108] (disabled)
			* 5560 MHz [112] (disabled)
			* 5580 MHz [116] (disabled)
			* 5600 MHz [120] (disabled)
			* 5620 MHz [124] (disabled)
			* 5640 MHz [128] (disabled)
			* 5660 MHz [132] (22.0 dBm) (no IR, radar detection)
			* 5680 MHz [136] (22.0 dBm) (no IR, radar detection)
			* 5700 MHz [140] (22.0 dBm) (no IR, radar detection)
			* 5720 MHz [144] (22.0 dBm) (no IR, radar detection)
			* 5745 MHz [149] (22.0 dBm) (no IR)
			* 5765 MHz [153] (22.0 dBm) (no IR)
			* 5785 MHz [157] (22.0 dBm) (no IR)
			* 5805 MHz [161] (22.0 dBm) (no IR)
			* 5825 MHz [165] (22.0 dBm) (no IR)
	Supported commands:
		 * new_interface
		 * set_interface
		 * new_key
		 * start_ap
		 * new_station
		 * new_mpath
		 * set_mesh_config
		 * set_bss
		 * authenticate
		 * associate
		 * deauthenticate
		 * disassociate
		 * join_ibss
		 * join_mesh
		 * remain_on_channel
		 * set_tx_bitrate_mask
		 * frame
		 * frame_wait_cancel
		 * set_wiphy_netns
		 * set_channel
		 * set_wds_peer
		 * start_sched_scan
		 * probe_client
		 * set_noack_map
		 * register_beacons
		 * start_p2p_device
		 * set_mcast_rate
		 * connect
		 * disconnect
		 * channel_switch
		 * set_qos_map
		 * add_tx_ts
		 * Unknown command (121)
	Supported TX frame types:
		 * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
	Supported RX frame types:
		 * IBSS: 0x40 0xb0 0xc0 0xd0
		 * managed: 0x40 0xd0
		 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
		 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
		 * mesh point: 0xb0 0xc0 0xd0
		 * P2P-client: 0x40 0xd0
		 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
		 * P2P-device: 0x40 0xd0
	WoWLAN support:
		 * wake up on disconnect
		 * wake up on magic packet
		 * wake up on pattern match, up to 20 patterns of 16-128 bytes,
		   maximum packet offset 0 bytes
		 * can do GTK rekeying
		 * wake up on GTK rekey failure
		 * wake up on EAP identity request
		 * wake up on 4-way handshake
		 * wake up on rfkill release
		 * wake up on network detection, up to 11 match sets
	software interface modes (can always be added):
		 * AP/VLAN
		 * monitor
	valid interface combinations:
		 * #{ managed } <= 1, #{ AP, P2P-client, P2P-GO } <= 1, #{ P2P-device } <= 1,
		   total <= 3, #channels <= 2
	HT Capability overrides:
		 * MCS: ff ff ff ff ff ff ff ff ff ff
		 * maximum A-MSDU length
		 * supported channel width
		 * short GI for 40 MHz
		 * max A-MPDU length exponent
		 * min MPDU start spacing
	Device supports TX status socket option.
	Device supports HT-IBSS.
	Device supports SAE with AUTHENTICATE command
	Device supports low priority scan.
	Device supports scan flush.
	Device supports per-vif TX power setting
	P2P GO supports CT window setting
	P2P GO supports opportunistic powersave setting
	Driver supports full state transitions for AP/GO clients
	Driver supports a userspace MPM
	Driver/device bandwidth changes during BSS lifetime (AP/GO mode)
	Device supports static SMPS
	Device supports dynamic SMPS
	Device supports WMM-AC admission (TSPECs)

1		Wiphy phy0
2		max # scan SSIDs: 20
3		max scan IEs length: 425 bytes
4		max # sched scan SSIDs: 20
5		max # match sets: 11
6		max # scan plans: 2
7		max scan plan interval: 65535
8		max scan plan iterations: 254
9		Retry short limit: 7
10		Retry long limit: 4
11		Coverage class: 0 (up to 0m)
12		Device supports RSN-IBSS.
13		Device supports AP-side u-APSD.
14		Supported Ciphers:
15		* WEP40 (00-0f-ac:1)
16		* WEP104 (00-0f-ac:5)
17		* TKIP (00-0f-ac:2)
18		* CCMP-128 (00-0f-ac:4)
19		* CMAC (00-0f-ac:6)
20		Available Antennas: TX 0 RX 0
21		Supported interface modes:
22		* IBSS
23		* managed
24		* AP
25		* AP/VLAN
26		* monitor
27		* P2P-client
28		* P2P-GO
29		* P2P-device
30		Band 1:
31		Capabilities: 0x11ee
32		HT20/HT40
33		SM Power Save disabled
34		RX HT20 SGI
35		RX HT40 SGI
36		TX STBC
37		RX STBC 1-stream
38		Max AMSDU length: 3839 bytes
39		DSSS/CCK HT40
40		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
41		Minimum RX AMPDU time spacing: 4 usec (0x05)
42		HT Max RX data rate: 300 Mbps
43		HT TX/RX MCS rate indexes supported: 0-15
44		Bitrates (non-HT):
45		* 1.0 Mbps
46		* 2.0 Mbps (short preamble supported)
47		* 5.5 Mbps (short preamble supported)
48		* 11.0 Mbps (short preamble supported)
49		* 6.0 Mbps
50		* 9.0 Mbps
51		* 12.0 Mbps
52		* 18.0 Mbps
53		* 24.0 Mbps
54		* 36.0 Mbps
55		* 48.0 Mbps
56		* 54.0 Mbps
57		Frequencies:
58		* 2412 MHz [1] (20.0 dBm)
59		* 2417 MHz [2] (20.0 dBm)
60		* 2422 MHz [3] (20.0 dBm)
61		* 2427 MHz [4] (20.0 dBm)
62		* 2432 MHz [5] (20.0 dBm)
63		* 2437 MHz [6] (20.0 dBm)
64		* 2442 MHz [7] (20.0 dBm)
65		* 2447 MHz [8] (20.0 dBm)
66		* 2452 MHz [9] (20.0 dBm)
67		* 2457 MHz [10] (20.0 dBm)
68		* 2462 MHz [11] (20.0 dBm)
69		* 2467 MHz [12] (20.0 dBm) (no IR)
70		* 2472 MHz [13] (20.0 dBm) (no IR)
71		Band 2:
72		Capabilities: 0x11ee
73		HT20/HT40
74		SM Power Save disabled
75		RX HT20 SGI
76		RX HT40 SGI
77		TX STBC
78		RX STBC 1-stream
79		Max AMSDU length: 3839 bytes
80		DSSS/CCK HT40
81		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
82		Minimum RX AMPDU time spacing: 4 usec (0x05)
83		HT Max RX data rate: 300 Mbps
84		HT TX/RX MCS rate indexes supported: 0-15
85		VHT Capabilities (0x038071a0):
86		Max MPDU length: 3895
87		Supported Channel Width: neither 160 nor 80+80
88		short GI (80 MHz)
89		TX STBC
90		SU Beamformee
91		VHT RX MCS set:
92		1 streams: MCS 0-9
93		2 streams: MCS 0-9
94		3 streams: not supported
95		4 streams: not supported
96		5 streams: not supported
97		6 streams: not supported
98		7 streams: not supported
99		8 streams: not supported
100		VHT RX highest supported: 0 Mbps
101		VHT TX MCS set:
102		1 streams: MCS 0-9
103		2 streams: MCS 0-9
104		3 streams: not supported
105		4 streams: not supported
106		5 streams: not supported
107		6 streams: not supported
108		7 streams: not supported
109		8 streams: not supported
110		VHT TX highest supported: 0 Mbps
111		Bitrates (non-HT):
112		* 6.0 Mbps
113		* 9.0 Mbps
114		* 12.0 Mbps
115		* 18.0 Mbps
116		* 24.0 Mbps
117		* 36.0 Mbps
118		* 48.0 Mbps
119		* 54.0 Mbps
120		Frequencies:
121		* 5180 MHz [36] (20.0 dBm) (no IR)
122		* 5200 MHz [40] (20.0 dBm) (no IR)
123		* 5220 MHz [44] (20.0 dBm) (no IR)
124		* 5240 MHz [48] (20.0 dBm) (no IR)
125		* 5260 MHz [52] (20.0 dBm) (no IR, radar detection)
126		* 5280 MHz [56] (20.0 dBm) (no IR, radar detection)
127		* 5300 MHz [60] (20.0 dBm) (no IR, radar detection)
128		* 5320 MHz [64] (20.0 dBm) (no IR, radar detection)
129		* 5500 MHz [100] (disabled)
130		* 5520 MHz [104] (disabled)
131		* 5540 MHz [108] (disabled)
132		* 5560 MHz [112] (disabled)
133		* 5580 MHz [116] (disabled)
134		* 5600 MHz [120] (disabled)
135		* 5620 MHz [124] (disabled)
136		* 5640 MHz [128] (disabled)
137		* 5660 MHz [132] (22.0 dBm) (no IR, radar detection)
138		* 5680 MHz [136] (22.0 dBm) (no IR, radar detection)
139		* 5700 MHz [140] (22.0 dBm) (no IR, radar detection)
140		* 5720 MHz [144] (22.0 dBm) (no IR, radar detection)
141		* 5745 MHz [149] (22.0 dBm) (no IR)
142		* 5765 MHz [153] (22.0 dBm) (no IR)
143		* 5785 MHz [157] (22.0 dBm) (no IR)
144		* 5805 MHz [161] (22.0 dBm) (no IR)
145		* 5825 MHz [165] (22.0 dBm) (no IR)
146		Supported commands:
147		* new_interface
148		* set_interface
149		* new_key
150		* start_ap
151		* new_station
152		* new_mpath
153		* set_mesh_config
154		* set_bss
155		* authenticate
156		* associate
157		* deauthenticate
158		* disassociate
159		* join_ibss
160		* join_mesh
161		* remain_on_channel
162		* set_tx_bitrate_mask
163		* frame
164		* frame_wait_cancel
165		* set_wiphy_netns
166		* set_channel
167		* set_wds_peer
168		* start_sched_scan
169		* probe_client
170		* set_noack_map
171		* register_beacons
172		* start_p2p_device
173		* set_mcast_rate
174		* connect
175		* disconnect
176		* channel_switch
177		* set_qos_map
178		* add_tx_ts
179		* Unknown command (121)
180		Supported TX frame types:
181		* IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
182		* managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
183		* AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
184		* AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
185		* mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
186		* P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
187		* P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
188		* P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
189		Supported RX frame types:
190		* IBSS: 0x40 0xb0 0xc0 0xd0
191		* managed: 0x40 0xd0
192		* AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
193		* AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
194		* mesh point: 0xb0 0xc0 0xd0
195		* P2P-client: 0x40 0xd0
196		* P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
197		* P2P-device: 0x40 0xd0
198		WoWLAN support:
199		* wake up on disconnect
200		* wake up on magic packet
201		* wake up on pattern match, up to 20 patterns of 16-128 bytes,
202		maximum packet offset 0 bytes
203		* can do GTK rekeying
204		* wake up on GTK rekey failure
205		* wake up on EAP identity request
206		* wake up on 4-way handshake
207		* wake up on rfkill release
208		* wake up on network detection, up to 11 match sets
209		software interface modes (can always be added):
210		* AP/VLAN
211		* monitor
212		valid interface combinations:
213		* #{ managed } <= 1, #{ AP, P2P-client, P2P-GO } <= 1, #{ P2P-device } <= 1,
214		total <= 3, #channels <= 2
215		HT Capability overrides:
216		* MCS: ff ff ff ff ff ff ff ff ff ff
217		* maximum A-MSDU length
218		* supported channel width
219		* short GI for 40 MHz
220		* max A-MPDU length exponent
221		* min MPDU start spacing
222		Device supports TX status socket option.
223		Device supports HT-IBSS.
224		Device supports SAE with AUTHENTICATE command
225		Device supports low priority scan.
226		Device supports scan flush.
227		Device supports per-vif TX power setting
228		P2P GO supports CT window setting
229		P2P GO supports opportunistic powersave setting
230		Driver supports full state transitions for AP/GO clients
231		Driver supports a userspace MPM
232		Driver/device bandwidth changes during BSS lifetime (AP/GO mode)
233		Device supports static SMPS
234		Device supports dynamic SMPS
235		Device supports WMM-AC admission (TSPECs)